Crocodile FR200200 [200V, 300A ver]
€294,00
- DC brushed PWM speed motor controller
- Reversible drive Forward & Reverse
- Up to 200V input voltage and 300A output current
- Current limit and temperature protection
- Wide range of controlling mode
| Discount | Piece(s) | Price |
|---|---|---|
| 1 | €294,00 | |
| Save 4% | 2 - 4 | €282,24 |
| Save 8% | 5 - 9 | €270,48 |
| Save 10% | 10 + | €264,60 |
Introducing our versatile DC motor controller that provides flexible functions for a wide range of plug & play usage. Perfectly suited for EV conversions, boats, and various industrial applications.
Our DC motor controller offers flexible input modes that enable you to control the output in a variety of ways. These modes include normal potentiometer or hall throttle (with 0.8-4.2V output)/joystick mode/direct PWM input (0-95%)/RC PWM receiver input 1,5ms +/-1ms, and the controller also fully controllable via serial communication with more adjustable parameters on the TX RX connector.
The controller comes with a current limiting function that prevents the output from overloading the motor and the controller. The normal current limit is adjustable between 0-200A, while the peak current is 300A. This function ensures safe and efficient operation of your motor and controller, while also prolonging their lifespan.
With these features, our DC motor controller provides superior performance and reliability, making it an ideal choice for a wide range of industrial or hobby applications.
- H-Bridge reversible direction controller for DC motor’s
- 4 operation modes: normal potentiometer or hall throttle (with 0.8-4.2V output)/joystick mode/direct PWM input (0-95%)/RC PWM receiver input 1,5ms +/-1ms
- Fully controllable via serial communication with more adjustable parameters on TX RX connector
- 4 quadrant operation Drive or regenerate in forwarding direction. And drive or regenerate in reverse direction.
- High-speed 32bit Cortex processor.
- 18kHz switching frequency
- Duty cycle: 0-100%
- Overheating protection (70°C/158°F)
- Universal 0-5V speed control input. You can use PLC output or any analog signal or PWM signal from uPC or RC receiver PWM signal.
- Regenerative braking (allows you to brake the motor and get back all the kinetic energy into the battery)
- Adjustable ramp speed (acceleration limit): 0-40 seconds
- Normal current limit is adjustable between 0-200A
- Peak current: 300A
- Universal supply voltage between 16-200V DC.
- Size and weight: 270 x 145 x 40 mm, 850g (PCB version without heatsink)
It’s important to note that for maximum output power, a heatsink is needed to properly cool the controller. While the controller is relatively lightweight and designed for ultra-high efficiency, adding a heatsink ensures that the PCB board can dissipate heat faster and keep the board cool, providing optimal performance and longevity.
