Introducing our versatile DC motor controller that provides flexible functions for a wide range of plug & play usage. Perfectly suited for EV conversions, motor boats, trolleys, forklifts, robots, and various industrial applications, this ultra-efficient board boasts low switching frequency resulting in a lightweight controller that eliminates the need for extra heatsink.

Our DC motor controller offers flexible input modes that enable you to control the output in a variety of ways. These modes include normal potentiometer or hall throttle (with 0.8-4.2V output)/joystick mode/direct PWM input (0-95%)/RC PWM receiver input 1,5ms +/-1ms, and the controller also fully controllable via serial communication with more adjustable parameters on the TX RX connector.

The controller comes with a current limiting function that prevents the output from overloading the motor and the controller. The normal current limit is adjustable between 0-150A, while the peak current is 200A. This function ensures safe and efficient operation of your motor and controller, while also prolonging their lifespan.

Product Features:

• H-Bridge reversible direction controller
• 4 operation modes: normal potentiometer or hall throttle (with 0.8-4.2V output)/joystick mode/direct PWM input (0-95%)/RC PWM receiver input 1,5ms +/-1ms
• Fully controllable via serial communication with more adjustable parameters on TX RX connector
• 4 quadrant operation Drive or regenerate in forwarding direction. And drive or regenerate in reverse direction.
• High-speed 32bit Cortex processor.
• Adjustable switching frequency (default: 500Hz)
• Duty cycle: 0-100%
• Overheating protection (70°C/158°F)
• Universal 0-5V speed control input. You can use PLC output or any analog signal or PWM signal from uPC or RC receiver PWM signal.
• Regenerative braking (allows you to brake the motor and get back all the kinetic energy into the battery)
• Adjustable ramp speed (acceleration limit): 0-40 seconds
• Adjustable top speed and output speed regulation for stable output
• True heavy load 10x3mm copper rails can handle very high peak currents and 150A continuous current. M6 connection.
• Normal current limit is adjustable between 0-150A
• Peak current: 200A
• Universal supply voltage between 6-30V DC.
• Size and weight: 200 x 112 x 20 mm, 350g

For optimal performance, it is recommended to use fan cooling to ensure efficient heat dissipation and keep the board cool, especially when maximum output power is required.